- Catalogs
* Starter capacitors
* Permanent capacitors
* Battery capacitors
* Terminal boards and lids
* Bakelite tubes
* Engine fans and protective caps
* Electrical insulators
* Power electronics
* Cable winders
* Coil tools and other products
* Switches and relays
- PDF catalogs

To complete the range of manufacturing, we have production means achieving compound polyester/glass fibers pieces for electrical insulation and distribute all parts required for the maintenance of rotating machines.


Our range of insulator polyester / fiberglass, will meet your busbar insulation requirements, and other power pick.

We have a permanent stock of terminal boards and lids, engine fans and their protective cap,

permanent capacitor and starter capacitor, power electronics, relays Klixon, the starter switch,

and of course high temperature cables and sheaths, insulation sheet or board, bakelite tubes and heat shrink tube.

Our experience in the field of mobile power also led us to enter into a catalog selection of cable winders.

Below our catalog




STARTER CAPACITORS

@  CONTACT FORM

                  220 Volts                                                                                                                       120 Volts

Reference

Capacity

Diam x Height


Reference

Capacity

Diam x Height

270041 40 F 37.5 x 76.7 Mounting terminals FAST-ON 6.35 x 0.8 x 12.5 270003 70 F 37.5 x 76.7
270042 50 F 37.5 x 76.7
270006 100 F 37.5 x 76.7
270043 60 F 37.5 x 76.7 Accessories :
270009 150 F 37.5 x 76.7
270045 80 F 37.5 x 76.7 270060                 Cap 270010 175 F 37.5 x 76.7
270046 100 F 37.5 x 76.7 270061             bracket Ht. 78 270011 200 F 37.5 x 76.7
270047 125 F 37.5 x 76.7 270062           bracket Ht. 110 270013 250 F 37.5 x 76.7
270049 150 F 37.5 x 117.8

270014 300 F 37.5 x 76.7
270050 175 F 37.5 x 117.8

270015 350 F 37.5 x 76.7
270051 200 F 37.5 x 117.8

270016 400 F 37.5 x76 .7

PERMANENT CAPACITORS

Specifications :

Dielectric: metallized polypropylene self-regenerating
Box and lid: self-extinguishing thermoplastic resin, equipped with a fixing pin M8x10
Reference norms : CEI 33-3, VDE 560-8, ASE 1029
Operating Temperature : -25 85
Tolerance on capacity : +/- 5%
frequency : 50 - 60Hz
Test voltage 50Hz : between armature 2.15 x Un during 2", to ground 35.kV during 1"
Protection class : IP 65

                       400/450 Volts                                                                                                           250 Volts

With terminals
FAST-ON 6.35
with wire
L. 250mm

Capacity

Diam x Height


Reference

Capacity

Diam x Height

230576

1 F 28 x 59.5

230504*
2 F 24 x 63
230577

1.5 F 28 x 59.5
230505*
3.15 F 27 x 66
230578

2 F 28 x 59.5
230507
5 F 28 x 59.5
230579

2.5 F 28 x 59.5
230508
6.3 F 32 x 59.5
230580
230605
3.15 F 28 x 59.5 Accessories : 230509
8 F 32 x 59.5
230581
230606
4 F 28 x 59.5 231001     cap     28
230526
9 F 36 x 59.5
230582
230607
5 F 28 x 59.5 231003     cap     32
230510
10 F 36 x 59.5
230583
230608
6.3 F 32 x 59.5 231004     cap     36
230511
12.5 F 36 x 72
230584
230609
8 F 32 x 59.5 231005     cap     40
230512
16 F 36 x 72
230585
230610
10 F 36 x 59.5 231006     cap     45
230513
18 F 40 x 72
230586
230611
12.5 F 36 x 72 231007     cap     50
230514
20 F 40 x 72
230587
230612
16 F 36 x 72
231008     cap     55
230515
25 F 40 x 97
230588
230613
18 F 40 x 72
231009     cap     60
230517
30 F 40 xx 97
230589
230614
20 F 40 x 72 231002        nut         M8
230525
35 F 45 x 97
230590
230615
25 F 40 x 97

230518
40 F 45 x 97
230591
230616
30 F 40 x 97
230519
50 F 50 x 97
230592
230617
35 F 45 x 97

230520
60 F 50 x 122
230593
230618
40 F 50 x 97

230521
80 F 55 x 122
230594
230619
50 F 50 x 97

230522
100 F 60 x 122
230595
230620
60 F 50 x 122




230596
230621
80 F 55 x 122
*Output by
wire

230597 230622 100 F 60 x 122




BATTERY CAPACITORS

@ CONTACT FORM

To improve the electrical angular displacement :

Reference

Reactive
power
Voltage

232305 5 kVar 230

234005 5 kVar 400

234010 10kVar 400


TERMINAL BOARDS AND LIDS

@ CONTACT FORM

Terminal boards

Reference

Type

Dimensions

Holes

Center

distance

Rods

Max intensity

207701 E0 40 X 25 Oblong 14 - 16 M4 16 A
207001 E1 50 X 32 Oblong 15  - 20 M4 25 A
207501 E2 54 X 34 Oblong 18 - 22 M5 32 A
207601 E8 60 X 40 Rond 23 M5 32 A
207101 E3 70 X 45 Oblong 20 - 30 M6 60 A
207201 E5 82 X 52 Oblong 28 - 33 M6 60 A
207301 E6 94 X 58 Oblong 30 - 40 M8 125 A
207401 E7 115 X 70 Oblong 38 - 50 M10 200 A
203801 E12 128 X 82 Oblong 40 - 50 M12 320 A
203901 E16 165 X 103 Oblong 57 - 68 M16 400 A

Our terminal blocks are supplied with washers and strips in plastic bags.

Lids

Reference

Type

Material

Width

Lenght

Height

208010 56 - 71 Nylon 71 71 38
208011 80 - 112 Nylon 85 85 42
208006 132 - 160 Aluminium 126 126 65

Terminal plate caps are delivered with their cable glands.

BAKELITE TUBES

@ CONTACT FORM

Impregnated phnoplast bakelite paper tubes - class = 120C - With good mechanical resistance

Reference

inside

outside


Reference

inside

outside

170013 6 mm 8 mm
170046 16 mm 24 mm
170014 6 mm 10 mm
170070 20 mm 24 mm
170015 8 mm 10 mm
170074 8 mm 13 mm
170016 8 mm 12 mm
170075 8 mm 14 mm
170017 10 mm 12 mm
170076 10 mm 15 mm
170018 10 mm 14 mm
170077 12 mm 14 mm
170021 12 mm 16 mm
170089 6 mm 7.8 mm
170022 12 mm 18 mm
170093 10 mm 20 mm
170026 16 mm 20 mm
170094 5.2 mm 9 mm
170028 18 mm 30 mm
170100 8 mm 16 mm
170030 25 mm 30 mm



note: other dimensions on request

ENGINE FANS AND PROTECTIVE CAPS

@ CONTACT FORM

Plastic (max temperature.120C)

TYPE G, tightening with screw

                 

Reference

Type

outside of

the blades

  Bore

outside

ring

Overall

height

Screw

Blades
number
280801 56 G 86 mm 12 mm 63 mm 18 mm 3/18" x 10 6
280802 63 G 97 mm 15 mm 74 mm 20 mm 3/18" x 10 6
280803 71 G 114 mm 17 mm 88 mm 22 mm 3/18" x 10 6
280804 80 G 130 mm 20 mm 102 mm 25 mm 3/18" x 10 6
280805 90 G 150 mm 25 mm 118 mm 28 mm 3/18" x 10 6
280806 100 G 164 mm 30 mm 128 mm 28 mm 3/18" x 10 6
280807 112 G 186 mm 30 mm 148 mm 32 mm 3/18" x 10 6


TYPE CP, tightening with beads
                                            Y    Z

Reference

Type

outside of

the blades

  Bore

outside

ring

Overall

height

Hub
height
Blades
number
bead
280920 52 CP 87 mm 8 mm 55 mm 20 mm 17 mm 8 Z
280921 56 CP 100 mm 11 mm 64 mm 20 mm 16 mm 8 Z
280922 63 CP 117 mm 14 mm 78 mm 23 mm 18 mm 8 Y


TYPE CG, tightening with beads type Y

                

Reference

Type

outside of

the blade

Bore

outside

ring

Overall

height

Hub
height
Blades
number
280930 63 CG 95 mm 14 mm 70 mm 14 mm 14 mm 10
280931 71 CG 126 mm 14 mm 94 mm 20 mm 15 mm 12
280932 80 CG 140 mm 19 mm 105 mm 25 mm 18 mm 12
280933 90 CG 160 mm 24 mm 120 mm 29 mm 20 mm 12
280934 100 CG 170 mm 28 mm 135 mm 30 mm 22 mm 12
280935 112 CG 190 mm 28 mm 145 mm 30 mm 23 mm 12
280936 132 CG 225 mm 40 mm 165 mm 39 mm 24 mm 12


TYPE CV, tightening with intgrated beads
                

Reference

Type

outside of

the blade

Bore

outside

ring

Overall

height

Hub
height

Blades
number
280895 63 CV 105 mm 15 mm 90 mm 24 mm 18 mm 6
280896 71 CV 125 mm 17 mm 105 mm 30 mm 20 mm 6
280897 80 CV 135 mm 20 mm 115 mm 32 mm 25 mm 6
280898 90 CV 160 mm 25 mm 135 mm 37 mm 25 mm 6
280899 100 CV 180 mm 30 mm 153 mm 42 mm 28 mm 6
280900 112 CV 194 mm 30 mm 150 mm 43 mm 31 mm 6
280901 132 CV 229 mm 40 mm 160 mm 44 mm 32 mm 6
280902 160 CV 290 mm 45 mm 220 mm 52 mm 32 mm 8


TYPE CB, tightening with beads type Y
                


Reference

Type

outside of

the blade

Bore

outside

ring

Overall

height

Hub
height

Blades
number
280910 71 CB 130 mm 14 mm 90 mm 29 mm 19 mm 12
280911 80 CB 140 mm 19 mm 100 mm 29 mm 18 mm 12
280912 90 CB 160 mm 24 mm 118 mm 30 mm 23 mm 12
280913 100 CB 180 mm 28 mm 128 mm 34 mm 25 mm 12
280914 112 CB 205 mm 28 mm 137 mm 37 mm 27 mm 12
280915 132 CB 235 mm 40 mm 179 mm 49 mm 30 mm 12
280916 160 CB 294 mm 45 mm 218 mm 54 mm 34 mm 12
280917 180 CB 335 mm 50 mm 255 mm 60 mm 36 mm 12

Aluminium (delivered with a gross bore)

                

Reference

Type

outside of

the blade

Gross

bore

outside

ring

Overall

height

Hub
height

Blades
number

Max

bore

280903 180 ALU 332 mm 46 mm* 282 mm 66 mm 35 mm 15 56 mm
280904 200 ALU 372 mm 55 mm* 310 mm 77 mm 48 mm 15 78 mm
280905 225 ALU 410 mm 60 mm* 345 mm 80 mm 48 mm 15 80 mm
280906 250 ALU 445 mm 66 mm* 385 mm 84 mm 55 mm 15 82 mm
280907 280 ALU 510 mm 63 mm* 430 mm 100 mm 57 mm 16 108 mm
280908 315 ALU 595 mm 60 mm* 510 mm 120 mm 60 mm 16 100 mm

* The gross bore dimensions can suffer variations (foundry).


Protective caps

TYPE plastic


Reference

Type

inside

Height


281001 T 56 108 mm 54 mm

281002 T 63 122 mm 62 mm

281003 T 71 137 mm 74 mm

281004 T 80 152 mm 72 mm

281005 T 90 175 mm 84 mm


TYPE mtallic


Reference

Type

inside

Height


281020 100 VM 187 mm 93 mm

281021 112 VM 222.4 mm 110 mm

281022 132 VM 257.4 mm 117 mm

281023 160 VM 310 mm 135 mm

281010 180 VM 348 mm 155 mm

281011 200 VM 385 mm 178 mm

281012 225 VM 433 mm 192 mm

281013 250 VM 480 mm 220 mm

281014 280 VM 536 mm 238 mm

281015 315 VM 600 mm 257 mm

ELECTRICAL INSULATORS

@ CONTACT FORM

All these insulators are made of polyester reinforced with glass fibers, they are self-extinguishing and can be used up to 120 C in room temperature, to higher temperatures, on request.

Barrel type (vertical and horizontal mounting):

                                                                   



Reference

Diameter "d"

Diameter "D"

Lenght "Lg"


670100 M6 35 mm 35 mm

670200 M10 35 mm 35 mm

670500 M8 45 mm 45 mm

670600 M10 45 mm 45 mm

670700 M12 45 mm 45 mm

670900 M16 45 mm 45 mm

675000 M8 60 mm 60 mm

675100 M10 60 mm 60 mm

675200 M12 60 mm 60 mm

671700 M16 60 mm 60 mm

672100 M16 80 mm 80 mm


Type skirt (vertical mounting):



Reference

Diameter "d"

Diameter "D"

Lenght "Lg"


675500 M6 50 mm 25 mm

672300 M8 50 mm 25 mm

672400 M10 50 mm 25 mm

672700 M10 65 mm 40 mm

672800 M12 65 mm 40 mm

672900 M14 65 mm 40 mm

673000 M16 65 mm 40 mm

673800 M14 75 mm 60 mm

673900 M16 75 mm 60 mm


NOTE: We produce on request isolators equipped with threaded rods, and we can study non-standard dimensions

POWER ELECTRONICS

@ CONTACT FORM

Diodes :


Reference

I max direct

U max reverse

Direction

Threading

Showing


210028
16 A
1200 V
Direct
10-32 UNF


210030
16 A 1200 V Reverse
10-32 UNF metal case

210015
20 A 800 V Direct 1/4" 28 UNF
metal case

210011
40 A 800 V Direct 1/4" 28 UNF metal case

210012
40 A 800 V Reverse 1/4" 28 UNF metal case

210033
70 A 800 V Direct M8
metal case

210034
70 A 800 V Reverse M8
metal case

210043
70 A 200 V Reverse M8
metal case / shunt 115 mm

210023
200 A 2000 V Direct 1/2" 20 UNF metal case / shunt 100 mm

210024
200 A 2000 V Reverse 1/2" 20 UNF metal case / shunt 100 mm

210025
300 A 2000 V Direct 3/4" 16 UNF ceramic case / shunt 160 mm

210026
300 A 2000 V Reverse 3/4" 16 UNF ceramic case / shunt 160 mm

Thyristors :



Reference

Item

Intensity

Voltage

Threading


211000 50 BTW501200 63 A 380 V 1/4"

211002 TK 2620 275 A 380 V 3/4"

@ CONTACT FORM

Molding : 

  

Reference

Item

Type

Intensity

Voltage


210208 NH 27700 A Bivalve 3 A 380 V

210209 BH 26701 A Threephase 3 A 380 V

210210 BH 27701 A Monophase 3 A 380 V

210212 GH 27702 A Threephase 4.2 A 380 V

210215 BL 44704 A Monophase 8 A 380 V

210217 GL 44706 A Threephase 11 A 380 V

210222 CH 27700 Bivalve 3 A 380 V

Diode bridge :



Reference

Item

Intensity

Voltage

Type

Dimensions


210106 GH 37931 25 A 380 V
28.6 x 28.6 mm

210108 BH 39931 35 A 380 V Monophase 28.6 x 28.6 mm

210104 BH 37741 12 A 380 V Bivalve 28.6 x 28.6 mm

CABLE WINDERS

@ CONTACT FORM




Reference

Wire

number

Wire cross-section

Coiled cable length

Outside Cable length

Amperage


301235 1 16 8.5 m 1.5 m 40 A

301231 3 1.5 10 m 1.5 m 10 A

301236 3 2.5 7 m 1.5 m 10 A

301246 3 2.5 7 m 1.5 m 10 A

301232 4 1.5 8 m 1.5 m 10 A

301247 4 2.5 5.5 m 1.5 m 10 A

301249 5 2.5 4 m 1.5 m 10 A

301248 7 1.5 5.5 m 1.5 m 10 A

301367 1 6 24 m 2 m 20 A

301361 3 1.5 24 m 2 m 10 A

301352 4 1.5 21 m 2 m 10 A

301353 4 2.5 15 m 2 m 20 A

301355 4 4 8 m 2 m 20 A

301354 5 2.5 10 m 2 m 10 A

301478 1 6 30 m
50 A

301471 4 2.5 25 m
10 A

301473 4 4 20 m
20 A

301472 5 2.5 20 m
20 A

301475 7 1.5 20 m
20 A

301476 12 1.5 15 m
20 A

Other models on request.

COIL TOOLS AND OTHER PRODUCTS

@ CONTACT FORM

Coil tools (product family 240000) : 

Brushes rectify stone
Commutators rectify stone
Scraper MICA

Type "toothbrush"

Type "pencil"

Knives 28mm or 130mm lengths,
blade thickness on request.


Hooping ruban (product family 150000) :


prepreg glass ruban class F=150C, different widths : 



Red copper cables and braids :

                                                                                                                                                                          

Reference

Section

Max amperage

Weight per meter


Reference

Section

Max amperage

Weight per meter

930048 1 18 A 0.010 Kg/m
930005 1 18 A 0.011 Kg/m
930049 1.5 21 A 0.015 Kg/m
930006 1.5 21 A 0.014 Kg/m
930050 2 25 A 0.020 Kg/m
930007 2 25 A 0.019 Kg/m
930051 2.5 30 A 0.025 Kg/m
930008 2.5 30 A 0.026 Kg/m
930052 3.1 36 A 0.033 Kg/m
930009 4 40 A 0.042 Kg/m
930053 4 40 A 0.040 Kg/m
930010 5.3 44 A 0.056 Kg/m
930054 5.3 44 A 0.053 Kg/m
930011 6 55 A 0.066 Kg/m
930055 6 55 A 0.060 Kg/m
930012 8 70 A 0.088 Kg/m
930056 8 70 A 0.080 Kg/m
930013 10 85 A 0.112 Kg/m
930057 10 85 A 0.100 Kg/m
930014 16 120 A 0.171 Kg/m
930058 16 120 A 0.165 Kg/m
930015 25 150 A 0.267 Kg/m
930059 25 150 A 0.255 Kg/m
930016 35 195 A 0.352 Kg/m
930060 35 195 A 0.355 Kg/m
930017 50 250 A 0.505 Kg/m
930061 50 250 A 0.525 Kg/m
930018 70 300 A 0.703 Kg/m
930062 70 300 A 0.700 Kg/m




930063 95 360 A 1.050 Kg/m


note: tin plated models on request


High temperature cables :

Operating temperature: 180C (230C peak), flexible copper core, silicone rubber sheath   


Reference

Section

Outside

Reference  green / yellow

Rererence  double insulation


180003 0.75 2.4 mm


180004 1 2.5 mm 180024 180500

180005 1.5 2.8 mm 180025 181500

180006 2.5 3.4 mm 180026 182500

180007 4 4.2 mm 180027 183500

180008 6 5.2 mm 180028 184500

180009 10 6.8 mm
184550

180010 16 8.4 mm


180011 25 10.3 mm


180012 35 11.6 mm




insulating sheaths :



Inside

Silicone sheaths 1500V / 250C

 Acrylic sheaths 2500V / 155C


 Heat Shrink shealths class : 135C

Inside before shrinkage

Inside after shrinkage


0.5 mm 140100 140700
140501 1.17 mm 0.6 mm

1 mm 140101 140701
140502 1.6 mm 0.8 mm

1.5 mm 140102 140702
140504 3.2 mm 1.6 mm

2 mm 140103 140703
140505 4.8 mm 2.4 mm

2.5 mm 140104 140704
140506 6.4 mm 3.2 mm

3 mm 140105 140705
140507 9.5 mm 4.7 mm

3.5 mm 140106 140706
140508 12.7 mm 6.4 mm

4 mm 140107 140707
140509 19 mm 9.5 mm

4.5 mm 140108 140708
140510 25.4 mm 12.7 mm

5 mm 140109 140709




6 mm 140110 140710




10 mm 140112 140712




12 mm 140113 140713




14 mm 140114 140714



 

SWITCHES AND RELAYS

@ CONTACT FORM

Centrifugal switches :




Number of poles

Type

Rotor bore

outside rotor

Stator fixing central distance

mounting holes

Set thickness


2 - 4 FSL 8 - 16 51 60 / 44 4.2 36.5

2 - 4 - 6 FSLK 8 - 20 61 61 / 46 4.2 36.5

2 - 4 - 6 FSK 16 - 25 76 68 / 76 5.2 39

2 - 4 - 6 FSG 25 - 36 90 83 / 70 6.2 44

Cam switches :

We have a large stock of switches, reversing switch, star / delta starter, to consult us according to your needs.

   

Switches and start relay :

Various models of starter switch, single phase, two-phase and three-phase, with or without automatic return.



Many KLIXON relay models in stock, we also have the 2CR4.


@ CONTACT FORM


Contact : Annie BOUGNON
Phone: 01 48 78 81 97
  Fax:  01 45 96 07 90 
Adress :
11, Henry Monnier - F 75009 - PARIS
E-mail : info@rougier-electro.fr


Sitemap
Legal informations